A center-console boat on a custom RedLine aluminum trailer
Ocala, Florida · Aluminum Trailer Builder

Built for the long haul.

Custom aluminum boat, airboat & catamaran trailers — welded by hand in Ocala and engineered to outlast the salt. NATM & NMMA certified, 20+ years on the road.

Get a Quote Call (352) 620-4963
NATM Certified NMMA Certified 20+ Years Building 4.6★ Google
20+ Years of trailer manufacturing
100% Aluminum — never rusts
NATM·NMMA Certified builds
4.6★ Rated on Google
What We Build

Trailers for every Florida boat

From bay-boat skiffs to 34′ offshore center consoles, airboats and power cats — built to your hull, in stock sizes or fully custom.

Single Axle Boat Trailers
16′ – 20′

Single Axle

Light, nimble aluminum trailers for bay boats, skiffs and smaller center consoles.

View Line
Tandem Axle Boat Trailers
25′ – 29′

Tandem Axle

The workhorse — twin torsion axles and disc brakes for mid-size offshore and bay boats.

View Line
Triple Axle Boat Trailers
29′ – 34′

Triple Axle

Maximum capacity for big offshore center consoles — built to carry weight over the long haul.

View Line
Airboat Trailers
13′ – 15′

Airboat

Purpose-built for Florida airboats — low, balanced and corrosion-proof for swamp and shoreline.

View Line
Catamaran Trailers
26′ – 28′

Catamaran

Twin-keel cradles and wide stance to support power-cat hulls without pressure points.

View Line

Custom Builds

Bring us your boat. We’ll build the trailer to fit it — exactly.

See All Trailers
Standard on every build

Over-built, on purpose

Double-bent aluminum I-beam frames, torsion axles, disc brakes and stainless hardware — the spec sheet other builders charge extra for is just how we build.

  • Double-bent aluminum I-beam structure
  • 3×3 aluminum cross members
  • Rubber keel pads on cross members
  • Stainless steel hardware
  • Torsion axles
  • Disc brakes
  • Cypress rear bunks with HD marine carpet
  • 2×6 PT front centering bunks
  • Aluminum wheels
  • Winch with 4″ roller
  • 2″ or 2-5/16″ coupler
  • Heat-shrink wire connections
  • Diamond-plate fenders + HD braces
  • 2,500 lb tongue jack
More Than a Manufacturer

Full-service trailer repair

We don’t just build trailers — we fix any make, any model. Boat, horse, utility, dump, gooseneck and more, repaired by certified techs in our Ocala shop.

Structural & Frame Repair

Restore trailer integrity from the ground up — reinforced frames built to last.

Welding & Custom Fabrication

One-off solutions, brackets, racks and repairs — done right, one weld at a time.

Axle, Bearing & Brake Service

Repack bearings, new seals, hubs, backing plates and electric-over-hydraulic conversions.

Full Re-Wire & LED Lighting

Complete electrical overhauls, new harnesses and LED upgrades.

Horse Trailer: Dividers & Tack Room

Rebuild stall dividers, add tack-room storage, ramp springs and door repairs.

Suspension & Hydraulic Jacks

Suspension upgrades and aftermarket hydraulic jack installs for easy lifting.

Boat TrailersHorse TrailersUtility TrailersDump TrailersGooseneck TrailersCar HaulersEquipment TrailersEnclosed Trailers
Explore Repair & Service
RedLine Fabrication · Beyond Trailers

Pole barn trusses & custom metal fab

The same welding and structural know-how that goes into our trailers builds heavy-duty steel and aluminum pole-barn trusses, custom weld-ups and CNC-cut parts. If it’s metal and it needs to be built to last, our fabrication division can make it — local, made-to-order, and over-built on purpose.

  • Pole barn trusses fabricated to your span & spacing
  • Custom welding in steel, aluminum & stainless
  • CNC metal cutting for clean, repeatable parts
Explore Metal Fabrication
Heavy-duty aluminum fabrication by RedLine
From the Shop

Real trailers, real builds

RedLine custom trailer build
RedLine custom trailer build
RedLine custom trailer build
RedLine custom trailer build
RedLine custom trailer build
RedLine custom trailer build
See the Full Gallery
Where We Build & Serve

Serving North-Central Florida

Based in Ocala on US-27 — building and repairing trailers for boaters, ranchers and haulers across the region.

Ocala, FLGainesville, FLThe Villages, FLCrystal River, FLLeesburg, FLInverness, FLDunnellon, FLBelleview, FL
Good to Know

Questions, answered

Do you build custom trailers or only stock sizes?
Both. We manufacture our RedLine boat, airboat and catamaran trailers in stock sizes from 16′ to 34′, and we build fully custom aluminum trailers to your boat and spec. Tell us the make, model and length and we’ll build to fit.
Do you repair trailers you didn’t build?
Yes — any make, any model. We service boat, horse, utility, dump, gooseneck, car-hauler, equipment and enclosed trailers: frame and structural repair, welding, axles, bearings, brakes, wiring and full custom fabrication.
Why aluminum instead of steel?
Aluminum doesn’t rust. For Florida salt and freshwater, a double-bent aluminum I-beam frame with stainless hardware and torsion axles lasts far longer than a painted steel trailer — that’s why we build the way we do.
Are your trailers certified?
Yes. RedLine is NATM and NMMA certified and built to strict trailer-manufacturing standards. Every trailer ships with the safety and structural standards those certifications require.
Do you really build pole-barn trusses?
We do. Alongside trailers, our shop fabricates heavy-duty steel and aluminum pole-barn trusses — the same welding and structural know-how, applied to your barn or pole-building project. Send us your span and spacing for a quote.
Where are you located?
We’re at 13233 N US Hwy 27 in Ocala, FL, serving all of North-Central Florida — Gainesville, The Villages, Crystal River, Leesburg and the Nature Coast. Call (352) 620-4963.

Let’s build yours.

Tell us your boat and we’ll build the trailer to fit — or get your repair scheduled today.

Get a Quote Call (352) 620-4963