Pole Barn Trusses in Ocala, FL

Trusses built in a trailer shop — and that’s the point

For 20+ years RedLine has welded aluminum boat trailers strong enough to carry 30-foot offshore boats over Florida’s worst roads. Pole-barn trusses are the same discipline — heavy structural welding, done right — so when builders and property owners need trusses fast, we fabricate them in the same shop.

Every truss is made to order. Tell us your clear span, pitch and on-center spacing and we’ll fabricate trusses to fit your building exactly — no off-the-shelf sizing, no settling for “close enough.”

Steel or aluminum — your call

We fabricate trusses in both. Steel is the workhorse for cost and strength. Aluminum costs more up front but never rusts — a real advantage for coastal, barn and high-humidity Florida builds where a steel truss eventually shows its age. We’ll help you weigh it for your project.

How a truss order works

You send the numbers. Span, pitch, spacing and how many — the list below. If your building is permitted, the permit drawings or your engineer’s plans are the best thing to send, because they already carry the dimensions and loads the trusses have to meet.

We quote and fabricate. Once the numbers are settled, the trusses are cut, fit and welded to your dimensions in our Ocala shop, so every one in the set matches.

You pick them up. Trusses are ready for local pickup at 13233 US Hwy 27. No freight quote, no waiting on a truck from out of state, and you can see them before they leave.

Building in North-Central Florida means designing for wind and humidity rather than snow. That’s part of why the steel-or-aluminum question matters here, and why we’d rather build to your real numbers than sell you a stock size.

What we need to quote your trusses

Send us as much as you have — even a rough sketch gets us started:

• Clear span (width)
• Truss pitch / roof slope
• On-center spacing
• Number of trusses
• Load requirements (snow/wind, if known)
• Material — steel or aluminum

Not sure on the specs? Send us what you’ve got or call (352) 620-4963 — we’ll walk you through it.